The final day has arrived of blogging. We have passed our racquetball challenge with a 100 percent and placed first in our class. It has been a pleasure working with Opi's Comet thus far and we look forward to our next challenge. This is Suraj signing off.
Friday, May 22, 2015
Monday, May 18, 2015
Day 39-Week 20
Our Monday began just like any other this week. Slumped and exhausted from the weekend we re tightened screws and began to practice our racquetball challenge. We found a few faults in our arm and are initiating construction of arm 2.0 on Tuesday.
Friday, May 15, 2015
Day 19-Week 38
As of this week we finished the arm and began coding. The ports seem to be a little clustered and thus is making it difficult to code. Our team continues to work hard and strive to be the best. We should finish the challenge by next week hopefully.
Monday, May 11, 2015
Week 19-Day 37
We have successfully completed the arm while for our ball challenge today. We still need to test it though, due to AP testing we will be missing some class periods however. LETS KEEP ON GOING OPI'S COMET!
Friday, May 8, 2015
Week 18-Day 36
Ever since the evil testing has began our group has had little time to work on our robot. We continue to plan and design new techniques for our challenge. Despite these obstacles we are determined to complete the ball challenge.
Monday, May 4, 2015
Week 18-Day 35
Another boring week of testing has taken away our precious time. Between ELA and Ap testing we manged to reconstruct our arm in the given period of one day. Our robot has been lately inconsistent in its movements and we plan to investigate.
Friday, May 1, 2015
Week 17-Day 34
Due to some technical difficulties our robot was unable to move on Friday. We had to take apart the motor and clean it out. Once done, our motor was functioning again and the robot was back to normal.
Monday, April 27, 2015
Week 17-Day 33
Due to the infamous ap tests our week has been destroyed. WE accomplished very little because our team was only here during the week for one week. We received some advice from Nick however, and got some ideas for our next challenge.
Friday, April 24, 2015
Week 16- Day 32
Opi's Comet wrapped up the week with a brand new constructed arm and a half-coded robot. Boggled with multiple problems, our robot continues to test our patience. You can consider this challenge as a work-in-progress.
Monday, April 20, 2015
Week 16-Day 31
Once finished with our last daunting task Mr. Martin assigned us the same one again, but this time we must do it autonomously. The infamous autonomous challenge stumped our team last time, but the tides will turn. We initiated our week with reconstructing the arm.
Friday, April 17, 2015
Day 30-Week 15
We have successfully completed our robot today. With smooth and concise precision our robot will be sure to dominate our challenge on Monday. Although Suraj is the superior driver Alec will be the D.D. (designated driver).
Monday, April 13, 2015
Day 29-Week 15
Opi's Comet is well on their way to creating the perfect robot. Needing to put a couple final touches on the robot, we began practicing the challenge course. It seems though our arm may need a little bit of readjusting,
Friday, April 10, 2015
Day 28-Week 14
This week our team has covered a lot of ground. From building an arm to establishing a new canopy, we are way ahead of schedule. Our team has initiated the coding process of the arm and our future seems to be as bright as a light bulb here at Opi's Comet.
Monday, April 6, 2015
Day 27- Week 14
We have finished our search for parts today and plan on assembling everything throughout the week. Opi's Comet is well on their way to finish first among the the other groups for building a successful arm.
Friday, April 3, 2015
Day 26- Week 13
Opi's Comet finished the week with agreeing upon our final building plan. We managed to start the construction of the arm. We are still in the process of contemplating of using a big motor or small motor.
Monday, March 30, 2015
Day 25-Week 13
We began our research today on the tetrahedral challenge. Googling various arm techniques our group has managed to select our design. Consisting of an arm-like structure to lift the tetrahedrons and a simple wheel, our design is ensured for success. My name is Suraj and I approve this message.
Thursday, March 19, 2015
Day 22-Week 11
Today was the big day of autonomous testing. After working countless hours on our robot we were able to score 90/100 on our autonomous test. For each straight line or turn we received a certain amount of points. Opi's Comet is very proud of their autonomous robot.
Monday, March 16, 2015
Day 21-Week 11
Being the last week to work on autonomous we scrambled to ensure our Robot worked correctly. While not having a cortex key we were forced to use an orange wire, which connected to the robot and controller. This forced us to walk our robot like a dog. Although inconvenient it got the job done.
Friday, March 13, 2015
Day 20-Week 10
After a strenuous week of attempting to correct our coding. We received a marvelous tip from Mr. Martin about battery power, which heavily influences the robot's course. We are now currently using all factors associated with the robot in order for it to work autonomously.
Monday, March 9, 2015
Day 19-Week 10
We began Monday morning with a great start. Completing two laps, the autonomous robot seemed almost complete, until we attempted to code the third lap. Our journey was about to take a turn for the worst.
Friday, March 6, 2015
Day 18-Week 9
After fixing up our robot problems we began to begin the actual coding process. We learned on how time speed, and voltage power affects the robot's performance and are currently on the first lap of the robot.
Monday, March 2, 2015
Day 17- Week 9
We kicked off the week with beginning to learn on how to code the robot in a way we haven't done before. We were supposed code the robot to go around two chairs automatically. However, our group wasn't unable to begin the actual process because of some maintenance problems with the actual robot.
Friday, February 27, 2015
Day 16- Week 8
During our coding experience we have stumbled upon multiple problems. We have attempted to trouble-shoot them but have remained unsuccessful, until we teamed up with 21 armored division to figure out how to code successfully. The outcome of the week was finishing the robot and beginning our coding adventure.
Monday, February 23, 2015
Day 15- Week 8
We finally finished our robot this week. We checked over it by tightening all the screws and looking to find any misplaced parts. Once done we had our robot checked by Mr. Martin, who finalized it and gave us permission to begin coding.
Friday, February 20, 2015
Day 14-Week 7
We continued to build our robot throughout the week. While doing so we learned the names of many pieces of equipment. Through trial and error we discovered many different techniques to building the robot. Overall, our week was productive, we managed to lock the engine in place with the chassis.
Day 13-Week 7
This week we initiated the process of building our robot. We used the Vex binder as well as Mr. Martin's guidelines to build the robot. Various tools such as Allen Wrenches were used to enhance our building speed.
Friday, February 13, 2015
Day 12-Week 6
Today Mr. Martin was absent so we decided to work on our blog. Once finished we looked over the boxes and checked for any obvious misplaced items. Our outcome was organizing and learning about tools this week.
Monday, February 9, 2015
Day 11- Week 6
We began to disassemble the robots as well as learn where everything is located. We used tools such as Allen Wrenches to take apart the robot. Mr. Martin gave us certain benefits for being the first group done.
Friday, February 6, 2015
Day 10-Week 5
We continued to help our colleagues and go over our robot for errors. With our are spare time we managed to accomplish some final touches to the blog as well as edit the template and colors to our likings
Monday, February 2, 2015
Day 9- Week 5
Being one of the first groups finished, we decided to aid others in the need of assistance with their square bots. We helped convert a step file that was malfunctioning. We helped Sozin's Comet as well as 21st armored division.
Friday, January 30, 2015
Day 8-Week 4
We wrapped up the week with finishing up out entire robot! After finally making the canopy and attaching it with the main robot we ended it all by adding the nuts and bolts. Overall it was a productive week.
Monday, January 26, 2015
Day 7-Week 4
We changed our Blog name to Opi's Comet (named after our roller coaster last year). Continuing our robot project we managed to finish the chassis and began the construction of the canopy.
Friday, January 23, 2015
Day 6-Week 3
Today we figured out how to properly download all the parts successfully. We began assembling them in order. Mr. Martin refreshed our minds on how to use SolidWorks too. While doing all of this we simultaneously updated our blogs. Our outcome of this week was assembling the right side panel with steps 1-3 completed.
Tuesday, January 20, 2015
Day 5-Week 3
Today we went over Vex Parts and learned how to download them. While some were trying to figure out how to download them our group began to start assembling it. It took us approximately twenty minutes of class to get the the parts downloaded and the rest of class to try to figure out assembling parts.
Friday, January 16, 2015
Day 4-Week 2
Mr. Martin went over new devices and gave us tips on robots. The types of items he went over were the brain,crystal frequencies, and sensors. In addition, he showed us an example of a Lego using sensors through a video. The outcome of this week gave us better background knowledge of the robots
Monday, January 12, 2015
Day 3-Week 2
We are continuing to review and learn about the blogging and robotics program. We have caught up to date with blogging and took our group pictures. We are currently working on the aesthetics of our blog.
Friday, January 9, 2015
Day 2-Week 1
We started the process of learning the basics of robotics. Mr. Martin started telling us some of the pros and cons to some of the tools and parts of different designs of robots. The outcome of this week was a basic introduction to robotics.
Monday, January 5, 2015
Day 1- Week 1
Today was day one working on our blog. We were introduced to blogger and exposed to new goals that we will try to accomplish in the future.
Subscribe to:
Posts (Atom)